Quite often, satellite TV users try to set up Tricolor TV on their own if the settings are lost. It is really not necessary to call a specialist for this, since the equipment supplier provides all the necessary instructions.
Instructions
Step 1
Before setting up Tricolor TV yourself, make sure that the receiver is properly connected. The receiver is connected to the TV using a high-frequency antenna cable or a conventional cable with a "scart" or "bells" connector. For RF connection, connect the cable to the antenna jack of the TV and connect to the RF Out of the device. Next, plug the receiver into an electrical outlet and turn on the power switch. If you are making a low-frequency connection, connect the receiver with a cable to the "Scart" or "tulips", then plug the receiver into the mains.
Step 2
Wait for the word BOOT and the digit of the channel number to appear on the screen. On the remote control, set the video mode with the A / V button. If the message “No signal” appears, then the receiver is connected correctly. Check for a strong enough satellite signal by trying to display any random channel. If there is a signal, an image will appear. If blue appears all over the screen, additional adjustments are required.
Step 3
Install the correct satellite dish to tune Tricolor TV yourself if the settings are lost. She must face south. Press the i button on the remote control to display the signal strength and quality scales on the screen. Turn the dish little by little to the right and left, up and down, while watching the changes on the TV screen. If your neighbors also use Tricolor TV, install the antenna in the same direction.
Step 4
Observe the behavior of both scales. Their full filling means a good signal. After a while, an image appears on the TV. If only one scale is filled, continue searching, gradually turning the antenna mirror first vertically and horizontally.
Step 5
Self-tuning "Tricolor TV" usually ends with the registration of the receiver. To do this, you need the number of the Tricolor TV user card and the code indicated on it, the serial number of the receiver, the owner's passport and the address where the equipment is installed. The fastest way to register a receiver is via the Tricolor TV website. Enter the required data; download, print and sign the contract, then send it by mail or take it personally to the company.
