How To Set Up Orion Express

Table of contents:

How To Set Up Orion Express
How To Set Up Orion Express

Video: How To Set Up Orion Express

Video: How To Set Up Orion Express
Video: Tutorial – Configuring an Orion for Basic DNP3 and SEL Communications 2024, April
Anonim

Orion Express is a Russian satellite TV operator that provides its services throughout the country. Technically, reception of the Orion Express signal is possible in the near abroad, in the countries of Eastern work and the CIS. Over the years, this company has established itself well in the domestic market as a reliable supplier of quality satellite TV services.

How to set up Orion Express
How to set up Orion Express

Instructions

Step 1

Signal reception is possible both in HD and in conventional format. The company was founded in 2005. Then it was called Stargate TV. Later, there was a rebranding, and it got its current name.

To install and configure the equipment, buy or find the following tools: GPS compass (with which you will be guided by the satellite), a hammer drill (you will use it to drill holes for attaching the plate), a sharp knife and electrical tape (for various manipulations with the cable), anchor bolts (for attaching the bracket), wrenches, protractor, vertical level, felt-tip pen or marker.

Step 2

Now that you have everything you need, you can start installing satellite equipment. First things first, choose the most convenient location for your cymbal. Remember that the signal should not be obstructed by nearby buildings and trees. Once you have chosen a location, secure the bracket to the wall using screw bolts and, if necessary, through studs.

Step 3

Pay special attention to the installation of the bracket so that wind or bad weather cannot damage the satellite equipment. Then assemble the antenna in accordance with the instruction manual, install the converter in the holder with its head towards the antenna mirror. Cut the cable. Adjust the converter in accordance with the table indicated in the instructions, fix the antenna on the bracket (do not forget to ground it), fix the cable to the rod near the converter, connect the other end of the cable to the receiver.

Step 4

Then carefully carry out the complete setup of the receiver with a change in the antenna angle, search for a satellite, set the signal reception from the Orion Express satellite. Activate the access card and you can enjoy numerous satellite channels.

Recommended: