Setting up a Prestigio gps navigator, as a rule, comes down to working with the software of this device. It is safer to do this operation through service companies, but if you are an advanced user, then do it yourself: update or replace the navigation program, update and index the maps.
Instructions
Step 1
Restoring the navigation software iGo 2006 version or updating it to the 2008 version on the Prestigio Geovision 350 GPS navigator is done as follows. Download the 2006 iGo program to your computer at https://depositfiles.com/files/9yry92jgz or the 2006 iGo program from https://depositfiles.com/files/gr69iyk8t. Connect your navigator to your computer via ActiveSync. Open the folder list on the navigator through the explorer and find the Flash_Storage folder. Install the iGo program into it (only one version!).
Step 2
Create an autorun.inf file with the following content in any simple (non-Word) text editor: navigation = / Flash_Storage / igo / igopna.exe. Place the autorun.inf file in the Flash_Storage folder. Start auto search and after the navigator finds satellites, set the required port of the GPS receiver in the settings.
Step 3
Instead of iGo, you can also install Navitel navigation software by downloading it from https://depositfiles.com/files/dtqheyg1k. After downloading, install it as follows.
Step 4
Install ActiveSync version 4.5 on your computer. Format the memory card of the navigator to the FAT or FAT32 file system. Unpack the archive with Navitel to the root directory of the memory card. Connect the navigator to the computer in the "Guest" mode. Copy the autorun.inf file from the Flash_Storage folder to your computer and edit it in any text editor by changing the line navigation = / Flash_Storage / igo / igopna.exe to the line navigation = / MMC_Storage / Navitel / Navitel.exe. Save the resulting file in the Flash_Storage folder instead of the old autorun.inf file.
Step 5
Download the necessary navigation maps for Navitel (for example, on torrent trackers or on the website https://w3bsit3-dns.com) and save them to the root directory of the navigator's memory card. Index the maps and create an atlas. Specify the path to the maps in the settings.
Step 6
The process of setting up a gps navigator is simple. However, do not forget to back up the original autorun.inf version on your computer so that you can restore the original navigation software in case of unsuccessful setup.
