Beeline subscribers do not need a computer to access the Internet. They can connect to WAP and visit WAP sites directly from their mobile phone. There are two ways to set up and connect WAP.
Necessary
Phone connected to the Beeline network
Instructions
Step 1
You can independently order WAP settings via GPRS by dialing any of the free numbers: 0674 10 11 - for Pantech, LG, Nokia, Ericsson, SonyEricsson, LG and Samsung phones; 0674 10 13 - for Siemens phones; 0674 10 15 - for new Nokia models (5140, 6220, 6230, 6600, 6620, 6650, 6810, 6820, 7200, 7270, 7600 and 7610). After the call, the client will receive a message with the settings that must be saved and then activated. This may require you to enter a PIN. In this case, dial 1234. If the SMS with information about the settings was not delivered, the subscriber must enter the following parameters himself in the phone menu: home page (home page): https://wap.beeline.ru; communication channel (data bearer): GPRS; access point name / APN: wap.beeline.ru; IP address: 192.168.017.001; port (port): 9201 (or 8080 for phones with TCP / IP support); username: beeline; password (password): beeline
Step 2
To install WAP without GPRS, you need to call the toll-free number that suits you: 0674 10 10 - for Samsung, Siemens, LG, Nokia, Ericsson and SonyEricsson phones; 0674 10 13 - for Siemens phones; 0674 10 14 - for new Nokia models (5140, 6220, 6230, 6600, 6620, 6650, 6810, 6820, 7200, 7270, 7600, 7610). The settings should be saved and activated in the same way as in the presence of GPRS. However, you can enter the necessary parameters yourself: home page (home page): https://wap.beeline.ru; Connection type: continuous; Connection security: off; channel (bearer): Data; dial-up number: 0671; IP address: 192.168.017.001; data call type: analog; speed (Data call speed): 9600; username: beeline; password (password): beeline
Step 3
After successfully setting up WAP, you can immediately connect to the Internet. WAP via GPRS is activated automatically when setting up, but if the service does not work, a Beeline subscriber needs to activate it on the company's official website or using the command * 110 * 181 #. WAP without GPRS (via a standard communication channel) is also connected on the website or by dialing the command * 110 * 111 #. After that, you should turn off and then turn on the mobile phone so that it detects the network.
Step 4
Then you can go to WAP sites. The main list is posted in the corresponding section of the official Beeline website - wap.beeline.ru. There, using the search engine, you can select the required WAP addresses.
