Modern mobile operators offer their subscribers a service called "Caller ID". However, before you can start using it, you need to connect and configure it.
Instructions
Step 1
You can activate the caller ID in "MTS" through the "Internet Assistant" self-service system. To use it, go to the official website of the operator and select the column with the same name (it is highlighted in bright red, it is hard not to notice it). First you need to get an access password and login. With the login, everything is simple, it is your mobile phone number, but the password must be set. To install, dial USSD-request * 111 * 25 # or call 1118. If you have chosen a request, then follow the instructions that appear on the phone display, and if you have chosen to call, then follow the instructions of the answering machine or operator. Please note that the password must be four to seven digits long. When you later log in and enter your password, make sure it is correct, because if you enter it three times incorrectly, access will be blocked for 30 minutes.
Step 2
Users of the "Megafon" network do not even need to specially activate the "Identifier" service. It will become active automatically when registering a SIM card in the network. However, this identifier will be powerless against the "Number Anti-Identifier". If the subscriber who is calling or writing to you has such a service activated, you will not be able to find out his number.
Step 3
In the event that you are a client of Beeline, you can connect the "Identifier" in two ways. Firstly, you have at your disposal the USSD request number * 110 * 061 #, and secondly, you can call the free number 067409061 at any time. Service activation is provided free of charge. True, for it to work correctly, you need to write down numbers in your phone book in the international format via +7.
