How To Connect An Audio Cable

Table of contents:

How To Connect An Audio Cable
How To Connect An Audio Cable

Video: How To Connect An Audio Cable

Video: How To Connect An Audio Cable
Video: How To Fix Headphone, AUX, MP3 audio cable 2024, December
Anonim

Audio cables are used to connect audio devices to speakers and other components. When working with speaker cables, it is important to observe some points and take into account the connection features.

How to connect an audio cable
How to connect an audio cable

Necessary

cables for connecting audio devices

Instructions

Step 1

Straighten out the speaker cables that you will connect to your devices in the future, and determine their approximate length according to the distance. Wrap up excess cable sections and fasten them with wire.

Step 2

Connect the cables to the speakers. To do this, turn them over and fasten the wires to the terminals on the back wall, observing the color scheme of the connection. Some cables, in addition to colors, also have special labels or stripes to identify them.

Step 3

Secure the position of the wires with special clamps, if any. Note that the more the wire is in contact with the speaker terminal, the better the playback quality will be.

Step 4

Repeat the operation for the rest of the speakers, also observing the connection of the wires according to the colors. All speakers will use the same wires, so it doesn't matter which one connects to which device.

Step 5

Place the speakers in the places in which they will be located in the future. Route the wires to the location of the main unit to which they will be connected. It is best of all that there is no furniture on the wires and in the future, the possibility of water getting on them is excluded.

Step 6

Connect the speakers to the main unit using speaker cables according to the diagram indicated on its rear wall, remembering that the wiring must correspond to the diagram.

Step 7

Secure the position of the cables in the device. Include some high bit rate audio file to test speaker connections. If one of them seems to work worse, check how tightly the cable adheres to the contacts on both devices.

Step 8

Use special brackets to secure the position of the cables or hide them under the baseboard so that they do not interfere with you and to extend their life if you do not intend to change the location of the devices in the future.

Recommended: