WPS is a standard developed by Wi-Fi equipment manufacturers to create a wireless network. This technology allows you to set up a Wi-Fi network without delving into all the technical nuances.
Protocol for automatic connection of a Wi-Fi network
The wireless internet connection allowed us to get rid of the cobweb of wires and cables and become truly free. But at the same time, there was a problem with configuring network security. An ordinary person without special knowledge is unlikely to be able to perform the correct (in terms of security) Internet connection setup.
For this, a special WPS protocol (Wi-Fi Ptotected Setup) was invented, which automatically configures a Wi-Fi network. With WPS, users will be able to set up a secure wireless network without going into all the technical details and encryption settings. This technology is supported by most modern Wi-Fi routers, as well as all operating systems starting from Win Vista.
Setting up a Wi-Fi network is divided into two stages: setting up an access point and connecting devices to a wireless network. In this case, the configuration can be performed without even going to the web interface. The first time you connect to the router, you will be prompted to configure the device. Then you will need to go through several steps using a special wizard, specify all the necessary parameters and then you can start working.
WPS Connection Methods
There are two ways to connect this technology - hardware and software. Hardware connection is made using the WPS button on the router or adapter. To do this, you need to press the button on the case, and then on the Wi-Fi adapter from which you want to connect. You need to press it once and hold it for a couple of seconds.
After a short period of time (a couple of minutes), the devices will connect to each other. In this case, the name of the Wi-Fi network remains the same, and the password is generated randomly. On some models of routers, the WPS button may be next to the Reset button. In this case, it is better not to keep it longer than 5 seconds, otherwise there is a risk of resetting all settings to the factory settings.
If there is no button for connecting WPS on the router's body, you can do it programmatically. To do this, you will need to enter a PIN code, which is usually glued to the bottom of the router. You can also find out this code in the web-based interface of the device in the WPS section. Next, you need to click on the wireless network icon in the tray, select your wireless device and click the "Connect" button. Then you need to enter the PIN-code and click the "Next" button. After that, the computer will connect to the Wi-Fi device, and you can use the Internet.