How To Make A Remote Control

Video: How To Make A Remote Control

Video: How to make a remote controller at home for a toys car | simple remote controller | from cartboard 2024, November

2024 Author: Ian Gardner | [email protected]. Last modified: 2023-12-17 01:17

You can control your computer using the remote control. To do this, we assemble an infrared receiver, remote control, program the buttons on the remote control using special software.

Necessary

10 μF capacitor; resistors 10 kOhm and 5 kOhm; diode brand KD521; photodetector operating at a frequency of 30-40 kHz; COM connector; bread board; glue; three-core shielded wire; spray paint; masking tape; soldering iron; knife; drill with drills; nippers; old remote control

Instructions

Step 1

Assembling the IR receiver circuit on a fragment of the breadboard. We connect it to the COM port of the computer.

Step 2

We disassemble the old remote control. We open the latches with a knife, moving its blade along the gap between the upper and lower halves of the console body, as well as pressing. We mount a hook into the system unit, and in the upper part of the remote control we make a cutout for it. We place the remote control.

Step 3

Install the open source product WinLIRC. Copy winlirc.exe and sample.cf to Startup. When requesting a configuration, specify the COM port number. Click the Raw Codes button. If messages appear in the window, then the circuit is working properly.

Step 4

Press the Learn button, follow the instructions of the program. We designate the name of the remote control. Then we press in turn all the buttons on the remote control and make sure that they all work properly. Then we run Analyze.

Step 5

Next, we configure client applications. For Winamp, copy GEN_IR. DLL to the winampplugins folder. When starting the player, we assign certain actions to the buttons. We perform similar actions for the Light Alloy video player.

Step 6

Next, we install the uICE program, which allows you to emulate a keyboard and mouse, open and close windows. We specify WinLIRC as the server. We will also install FlexRemote version 2.1.8 Free to set code combinations on the remote control buttons; IRTricker for displaying messages on the screen; Girder 4.0.3 beta to work with various plugins.

How To Control Cars On Radio Control

Radio-controlled cars can delight not only children. There are clubs in which quite adults compete in the races of their models. However, as is the case with any car, a radio-controlled model must, first of all, learn to operate. Instructions Step 1 Control panels are of two types:

How To Make Remote Control

Remote control televisions have long taken root in our homes. But sometimes you don't want to part with the old device, which does not have such a function. A home craftsman with the necessary skills can add a remote control to it. Instructions Step 1 Many later unified black and white tube TVs allow standard wired remotes to be connected to control volume and brightness

How To Make A Radio Remote Control

First of all, there are a lot of radio remote controls, and they can be purchased in many stores. The question is how, suppose, to make a radio-controlled pyrotechnic remote control for remote detonation of several charges at once? After all, such a device would be ideal for holding a festive New Year's pyroshow

How To Make A Typewriter On The Remote Control

Most modern toy cars with remote controls use a radio channel. This forces parents to purchase batteries for both the remote control and the toy itself. If the car uses wired control, the batteries are inserted only into the remote control, and they are consumed only while driving, but not in standby mode, as with radio control