"Zenith" is a camera made in the USSR, which is still used by amateurs of the "old" school. This unit is a professional camera and produces very high quality images when set up correctly. In order for it to serve you longer, periodically clean its "feathers".
It is necessary
- - camera "Zenith";
- - screwdriver;
- - file.
Instructions
Step 1
Pull out the film rewind dial to disassemble the camera. Install it in such a position that it is convenient to unscrew the screw located at its base. After that, unscrew the screw and pull out and remove the limb together with the axle.
Step 2
If the spring on the bushing does not come out with the axle, pull it out with a round file. Unscrew the ring from the dial, before that, find the locking screw on its rim and loosen its fastening. Hold the plug, then screw the ring counterclockwise from the inside of the machine.
Step 3
Remove the plug from the camera after you have removed the ring. For further disassembly of "Zenith" remove the exposure meter calculator. The sleeve on which the calculator is mounted has special recesses for tightening tools on the bottom of the inner part. To unscrew it, make a socket wrench from a tube that is suitable in size. Unscrew the sleeve, remove the calculator parts. Remove the speed dial and then the indicator that switches lamps / flashes.
Step 4
Remove the winding trigger so that the cover can be removed. To do this, unscrew the clamping nut and remove the counter disc. Then remove the clamping washer clockwise, insert the key or clamping tool into the slot. Remove the large diameter sleeve in the same way. Unscrew three screws, remove the winding lever. The cover can then be removed to disassemble the camera. Unscrew the fastening screws, pull off the cover.
Step 5
Unscrew the six screws from the top shoulder to remove the shroud. Unscrew the screws with an exact size screwdriver on the pentaprism, put it in a box of cotton wool. To remove the mirror device, remove the screw from the cushion frame that is holding the overhang of the hook. Next, remove the screws at the base of the device that secure the arm bar. Then remove the mirror retainer.
