The standard radio tape recorder supplied with the car may not suit the owner for various reasons: for example, it may not be of the highest quality. In this case, it is easy to replace it by purchasing new equipment in the appropriate salon or by purchasing it "from hand".
Instructions
Step 1
Install the radio itself first. In doing so, follow the special instructions. The main components of the device will be marked there, and the method of its installation will be described step by step. In addition, in the manual you can read about the possible nuances when working with a radio tape recorder. After installation, read the manual again, check if you have completed all the points correctly.
Step 2
After completing the installation process, turn on the instrument. After that, the system will ask you to enter a code. However, it may look different (it all depends on what brand and model your radio is).
Step 3
The display may ask you to enter the code directly. As soon as you see Code, enter the appropriate numbers. Here's an example: your code is 123456, which means that you will have to sequentially press each of the numbers (first 1, then 2, and so on). It should be noted that not all radios support the display of the entered code on the display. As soon as you press the last key, the device will turn on, but only if you have specified everything correctly.
Step 4
In the event that the inscription Code In appears, enter your code using the keys from one to six. After that, confirm the indicated combination of numbers by pressing the Mode and Scan buttons simultaneously and holding them for several seconds.
Step 5
When the word Save appears, press two keys at once ("TP" and "TA"). Then wait for the code 1000 to be displayed. Now you can enter your password. To confirm it, press the previously indicated buttons again and hold them for a couple of seconds.
Step 6
When prompted to enter a code, you can also enter it, but using only keys one to four. In this case, to enter, for example, the number 6, you need to press the button six times (that is, the number of clicks will correspond to each digit of the code). Use key 5 and Up or Down to confirm your selection.
