Now almost all entrance doors are equipped with intercoms. To get to your apartment, you also need to have an additional key. What if you need to program the key for the intercom yourself?
It is necessary
- - intercom;
- - new key.
Instructions
Step 1
Carry out the key coding for the Raimann brand doorphone. To enter the menu, click on the key button, then enter the numbers from 9 to 4 in sequence. Wait for the beep. Next, enter the numbers from 1 to 6. The letter P should appear on the screen. To go to the menu items, select the key from 2 to 8 (2 - settings where you can go and program the key).
Step 2
Go to the service menu of the VIZIT intercom, for this dial # 99, then a beep will sound. Then enter the code 1234, wait for the signal. To go to the key programming menu item, press the button 3. Next, enter the apartment number, attach the key to the intercom, dial # to save the changes, then * to exit the intercom settings menu. If it does not have an asterisk and a pound key, the C and K buttons are used instead.
Step 3
Encode the keys of the Cifral intercom. To do this, click on call 41, then call 1410.2, enter 7054 3. Click on any number, hold until the inscription appears. In the menu, you can write your key in the doorphone memory. To do this, press button 5, then enter the apartment number, the Touch button will appear on the screen.
Step 4
Attach the key. It will be recorded in the intercom memory. All described methods will work if the default settings were not changed by the installer, which is unlikely. As practice shows, this happens quite rarely.
Step 5
Encode the keys of the Eltis doorphone. To enter the system menu, press button B, keep it pressed for 7 seconds. Enter the system password (1234). The firmware will be shown on the screen and the menu will be loaded. Dial the apartment number, press "B".
Step 6
Next, the LF command will appear, lean the key. The message Add will appear on the screen, if you have not previously coded keys for this apartment. Or apartment number, if the encoding has already been done. You can open the door with this key immediately after exiting the system menu.
