Every owner of a mobile phone would like to keep the body of his device the way it was upon purchase. But on a frequently used cell phone, sooner or later, scratches appear, which degrade the appearance of the handset. To get rid of unsightly damage in the shortest possible time and with a minimum investment of money, the use of a special polishing paste for plastic surfaces allows. A few simple steps are enough to remove scratches from the phone case.
It is necessary
- - polishing paste for phone screens;
- - cotton pads or soft cloth;
- - cotton swabs.
Instructions
Step 1
Before starting the procedure, remove various dirt from the case and display of your phone. This can be done with special wet wipes or surface cleaning products for mobile devices.
Step 2
Then squeeze some polishing paste onto the scratched area. Try to apply the product to an inconspicuous area on the side or back of the case.
Step 3
Take a cotton swab and rub the product, pressing down on the surface. If after this procedure the plastic surface has lost its color or it turns out that the phone's display consists of several layers, on the top of which bubbles have appeared from the use of paste, then refuse to use polish.
Step 4
If after the trial application the color of the plastic has not changed and there is no deterioration in the appearance of the device, continue using the polishing paste.
Step 5
Take a cotton pad or soft cloth and rub the applied product for 2-3 minutes, pressing firmly on the plastic. Repeat rubbing, squeezing out a new batch of polish each time, until the surface is smooth.
Step 6
After polishing, wipe your phone with a clean, dry cotton pad or a new soft cloth. To protect the screen or the glossy back cover of the cell from new damage, stick a special film for displays on the surface, having previously cut it to the required size from a large piece of film.
Step 7
To protect the body of the device from new scratches, purchase a special, suitably sized case. Choose protective accessories that allow you to use the machine freely. These requirements are met by silicone or leather cases that have holes in the location of the keys, connectors and the speaker of the phone or purse, completely covering the mobile, with a non-slip inner surface.
