At the present time, cable (satellite) television has become widespread, in which a large number of television programs can be transmitted over one cable. You can watch them both on a regular TV and on a computer to which a TV tuner is connected. There are several ways to tune the TV channel in such cases.
It is necessary
TV, tuner
Instructions
Step 1
To automatically tune the TV to all programs transmitted via cable, enter the main menu of the TV. Select "Channel setup". In this menu window, select the "auto-tuning" item. The TV will sequentially go through all the frequencies, memorizing those at which the signal is present.
Step 2
For manual tuning, select "manual tuning". In this menu, select the channel number, the desired band and press the "search" button. After the system has captured the settings of any channel, click “save” to save or “search” to search for the next channel. Sort the channels in the required order, for which first switch the TV to this channel, then change the sequence number of the channel, and then save the new settings.
Step 3
To configure the tuner installed in the system unit, install the driver and software from the CD supplied with the tuner. Connect the antenna cable to the tuner input. When you start the program for the first time, the automatic tuning of the tuner will be offered. Accept for auto-tuning or skip this step for manual tuning later.
Step 4
For manual tuning of the tuner, press the "tuning" button on the program panel. In the window that opens, select the "channel" tab. In this tab select the input from which the signal should come (cable or antenna). Then select the country and region where you live. Select the color signal format below. Click the auto scan button. After the end of the search, select the channels you need from the list in the table (by checking or unchecking the corresponding lines in the “remember” column of the table). Then (if necessary) sign the selected channels in the “channel name” column. To restrict access to any channels, assign a password by clicking on the "password" button. After that, mark these channels with a checkmark in the “close with password” column. Arrange the channels in the desired order using the channel sort function. Click the "save" and "ok" button.
