Channel tuning takes place on different TVs in approximately the same scenario, the same applies to devices from the manufacturer Sony. Channel tuning in some models is carried out without a remote control.
It is necessary
- - instruction;
- - remote control.
Instructions
Step 1
Use the automatic search function for available TV channels for your device model. On the front of the TV or on the remote control, press and hold the channel setup menu button for a few seconds. This should bring up an automatic search menu. Wait until the end of automatic channel tuning, after which the TV will return to normal viewing mode by itself.
Step 2
Tune channels manually. Enter this mode using special buttons on your remote control (for some, pressing two buttons at once) or from the panel of the TV itself. Use the +/- buttons to tune the channel frequency, adjust the quality of the signal received by your antenna and move on to the next setting.
Step 3
Use the volume buttons to navigate through the menu items. Please note that some TV models may automatically search for a channel, and when the desired channel is displayed on the screen, its position is fixed by pressing certain buttons.
Step 4
Read the section on how to set up channels in the instructions for your TV. If you do not have it for any reason, download a new one from the Sony official website or from other Internet resources. Also note that you can call your service provider's technical support for assistance with tuning the channels on your television.
Step 5
If you are using satellite equipment, perform the initial channel setup in your receiver. Here it is best not to change the settings that were originally made by the workers, but on the TV the setting is performed according to the same principle, but it will be more expedient to simply perform an automatic search.
