The headset is most often used with a mobile phone or player. Sometimes it is different in cost and quality: from inexpensive to sophisticated and stuffed with the latest developments in the field of electronics. Here the choice falls entirely on your shoulders and head. But you can do it easier, and not even bother with a choice in the store. Assemble your headset. This is not at all as difficult as it might seem at first glance.
Necessary
- - adapter;
- - the wire;
- - insulating tape;
- - soldering iron;
- - microphone;
- - speaker.
Instructions
Step 1
Take an old headset for confidence. It doesn't even need to fit the standard jack on your phone. For this purpose, an adapter will serve, which must be purchased or dug up in your treasury. It is needed so that later you can connect any headphones. You can use an adapter that often comes with a particular player.
Step 2
Take the adapter and cut off the part that should fit into the player. The appeared wires (there should be three of them) you need to strip, that is, cut off the top film with a knife or scissors. Then take care of the headset itself.
Step 3
Disassemble the place where the headset has a microphone, sound button and / or call button. Cut the wire that goes to the earphone so that the ends of the wires are visible. That is, do not cut at the root.
Step 4
Next comes the process of adhesion. Connect the wires based on color. They must be identical. Solder red with red, white with white, etc. After connecting the wires, wrap them with electrical tape. This is necessary both for the strength of the structure and for your safety.
Step 5
Place the soldered wires back into the microphone box. Plug in any headphones and you're done. Enjoy the quality of the sound and the knowledge that you have assembled this little miracle of technology with your own hands.
Step 6
Recommendations for setting up your wireless headset and phone:
The secret is simple. All devices (both phone and headset) must be turned on.
On your phone, start searching for devices in the bluetooth menu. At the same time, press the headset power button until the indicator comes on. Make sure it is on and not blinking. The phone should find the headset and connect to it. If it doesn't happen right away, just search for devices again with the headset already turned on.
