If you follow the instructions exactly and perform all operations in the order indicated in it, then there will be no problems with assembling and installing the antenna. Even an inexperienced user can handle this task.
Necessary
Satellite dish parts, assembly tool, instruction
Instructions
Step 1
We fix the arc of the converter holder on the support with special screws. We install the support cheeks between the bracket parts, insert spacer sleeves into the gap between them and outside the washer, fix it all with bolts.
Step 2
We screw the support with the bracket and the converter holder arc to the reflector. We install the feed holder on the arc of the converter holder. To do this, insert the ledge of the converter holder into the groove and grasp the feed. We tighten the bolt.
Step 3
To turn the antenna to the desired angle, slightly loosen the bolts. We turn the antenna so that an angle is formed between the reflex plane and the vertical, equal to? - 19.65 ?. After that, tighten the bolts again.
Step 4
We connect the LNB satellite converter.
