The I9 is a copy of the Iphone from the Chinese manufacturer Sciphone. The device looks like it and the device from Apple, but has different software. The firmware is carried out using a homemade cable and special computer software.
Necessary
Specially made flashing cable
Instructions
Step 1
Chinese phones can only be flashed using a self-made cable. To do this, download the cable diagram for flashing Chinese phones. Pinout the wire that comes with the device by opening the plug. Solder the required pins and check the cable is working properly.
Step 2
Fully charge the battery before connecting your phone. After charging, turn off the device, remove the battery, insert it back. Switch on the device.
Step 3
Download the Spider Man 2.5 application from the Internet and install it according to the instructions of the installer. Connect the cable to the COM port of the computer, run the installed program.
Step 4
In the window that appears, click on the Connect button and check the box next to Set new port. Select Com 1 from the given values, specify baudrate BPS_115200.
Step 5
Download the firmware file for your phone and save it in a folder convenient for you. In the program menu, click on the Flash button and select the downloaded device software file.
Step 6
As soon as the message Press ON key please is displayed in the program window, connect the device and press the central button of the device for two seconds. If everything went well, a red graph will appear on the screen, which displays the firmware process.
Step 7
The software change takes 20 to 40 minutes. Try not to perform any operations on the computer, do not run any resource-intensive applications. After waiting for the end of the flashing, disconnect the phone, and then remove and reinsert the battery. The device can now be turned on.
