S8000 is a popular budget phone from Samsung, which has all the necessary functions of a modern device. If certain problems arose during operation and constant freezes are observed in the operation of the device, you can get rid of them using the firmware.
Instructions
Step 1
Before the flashing process, download and install the drivers to connect your phone to your computer. To do this, download them from the official Samsung website or use the disc that comes with your mobile device. After that, connect the phone and wait for it to be detected in the system.
Step 2
Download the firmware file for your phone from the Internet. You should not install software that has a version lower than the installed firmware on your device. To find out her number, dial * # 1234 # in the phone number input mode.
Step 3
Unpack the firmware into a separate folder using an archiver program. The firmware is a number of files, the path to which will need to be specified during the installation process.
Step 4
Download and install the Multi Loader software from the Internet. Run the utility using the shortcut on the desktop. In the Boot Change item, set the Full Download parameter. Click on the BOOT button and specify the path to the folder where you unpacked the firmware files, then select the BOOTFILES directory. Similarly, for the Amss item, specify the path for the amss.bin file, Apps - apps_compressed.bin, Rsrc1 - rsrc_s8000, Rsrc2 select the Low parameter, and select RU for Factrory FS.
Step 5
Transfer the phone to the we will fix the firmware. To do this, hold down and hold the volume down and camera buttons on the device. Keep them held down until the message about the transition to Download Mode appears on the screen. Connect your phone to your computer and click Port Search in the Multi Loader window. After identifying the phone, click Download and wait for the procedure to complete. After the corresponding notification appears, you can turn off the phone. If the procedure was successful, your phone will turn on and start up with the new version of the software.
