Voice communication makes electronic games more effective and interesting. To set it up, you need a sound card in your computer, additional software, a headset (headphones and a microphone). If you do not have a microphone, still establish a voice connection - you will hear others, and this will add excitement to the game.
Instructions
Step 1
For voice communication in the game, you can use the TeamSpeak program. This is actually a network phone, but due to its stability, minimum required resources and minimum TS is in demand. Install the TeamSpeak program and the patch for it. Copy both of these files to the root folder for the TeamSpeak program (C: Program FilesTeamSpeak Client). Allow the system to overwrite existing files. After completing these steps, you will install the program for voice communication. Customize it.
Step 2
Run the program. To do this, click Connection, then Loop Back Test. In this mode, TS will connect to itself, as it were, and you will listen to yourself, but with a certain time delay. This mode is convenient for settings. Then click on the Settings tab.
Step 3
Disable Voice Activation (this is voice activation) and assign a button, when you click on which you will have a transfer. Move the checkbox from Voice activation to the Push key command, then press Set key or any other convenient button that you do not use in the game (for example, the D button). Press the D button and say something into the microphone. In response, you should hear your own voice.
Step 4
Then adjust the sound to your liking. You can check the Voice Normalization checkbox, and the Send Settings slider can be set to the 3rd position on the left, and Output Settings can be set to the 7th position on the right. All of these settings will depend on your headphones and microphone. Do not use desktop speakers and a separate microphone, because during a conversation there will be extraneous noises and echoes, which is not very convenient.
Step 5
Connect to the server. To do this, click Connection, and then the Connect to Server command. Enter your nickname in the dialog box in the Player Name field. It is better to use the nickname the same as in the game.
Step 6
In the Server field, you must enter 83.102.237.229 or ts.corbina.net, the password to log into the server is 1. Next, click on the Connect command, and you should connect to the server. Connect to the room where you will be chatting. To do this, click on the rooms that are offered.
