Water ingress is believed to cause serious damage to digital cameras. In reality, things may not be so bad, and the problem is easily eliminated. You don't need to be a technical expert, and fixing requires a few simple steps. In this case, you will need to work in a dry room with good ventilation.
Instructions
Step 1
Diagnose the problem
Before attempting to repair a digital camera, it is necessary to determine the nature of the breakdown. How much water got inside? Was she completely immersed in liquid, or were there only a few drops inside? The more water is in contact with the device, the more damage can be.
Step 2
Keep the product off
This is one of the most important steps. By turning on the camera, you can only aggravate its condition. Always leave appliances turned off until they are completely dry.
Step 3
Dry the machine
There are 2 main ways to remove water from an appliance. You can place the camera in a dry and well-ventilated place. Make sure all blinds and flaps in the device are open. This will provide better air access, which removes moisture from the inside.
The camera can also be placed in a box of rice or silica gel. If the device is not too wet, he will only have to spend the night here. Otherwise, it needs to remain in the box for up to 7 days. It may be better to leave the camera for this period no matter how much water gets inside. This way you will know for sure that it is dry.
Step 4
Use a hairdryer
If a little water has entered the device, it is best to use a hairdryer to remove it. It will gently dry the outside of the camera. In this case, you do not need to set the hair dryer to the maximum mode - this way you will only drive the water deep into the equipment. Use minimal settings.
Step 5
Eliminate salt water problems
If you drop the unit into salt water, the damage may be more extensive. Salt is corrosive and can be completely destroyed if not removed quickly. Disassemble the camera as soon as possible and rinse with fresh water. Once the salt has been washed, follow the previous steps to dry the garment.
Step 6
New batteries
After the camera is dry, you may need new batteries if it still does not work. This is the last self-repair method. If it does not help, you will have to buy a new camera or carry this one to a service center.
