In order to connect the Internet on a mobile phone with a SIM card of the MTS operator, it is necessary that the device supports WAP and GPRS, as well as enable and configure these options in the phone menu.
Instructions
Step 1
Before connecting to the services, make sure that your mobile phone supports Internet access via WAP and GPRS. This information can be found in the instructions for the device.
Step 2
In order to connect to the Internet at the MTS operator, you need to go to the phone menu, select the "Settings> Internet" option and create a new access point with the following parameters: profile name: MTS WAP; start page: wap.mts.ru; data channel: GPRS; access point: wap.mts.ru or internet.mts.ru; IP address: 192.168.192.168; Port: 9201 or 8080; username and password: mts. The names of the menu items and the number of settings depend on the specific model of the device.
Step 3
To connect Internet access from a phone based on the Android operating system, press the MENU button of the device and select the "Settings" option, then the "Wireless" item.
Step 4
Check the box "Mobile Internet", then enter the menu "Mobile networks". Select the MTS internet profile or click the "Create APN for a new connection point" menu with the following parameters: name - MTS internet; APN - internet.mts.ru; login and password - mts.
Step 5
Connect the tariff option "BIT" or "SuperBIT" for unlimited Internet from your phone. To do this, dial * 111 * 995 # (to activate the "BIT" option) or * 111 * 628 # (to activate the "SuperBIT" option) and the call key. You can also send a message with the text 995 (for connecting the "BIT" option) or 628 (for connecting the "SuperBIT" option) to number 111. In case the total amount of received-transmitted data reaches 5 Mb / h (for the "BIT ") Or 15 Mb / h (for the" Super BIT "option), the speed is reduced to 64 Kb / s until the end of the current hour.
Step 6
While maintaining the speed limits (in case of service disconnection), disconnect the GPRS connection and set it up again.
