How To Strengthen A Router

Table of contents:

How To Strengthen A Router
How To Strengthen A Router

Video: How To Strengthen A Router

Video: How To Strengthen A Router
Video: How to Extend Wi-Fi Range on the CHEAP 2024, November
Anonim

Wi-Fi routers transmit signals to confined spaces. The data transmission distance from the router is reduced if the device is used in a residential environment. Its coverage may not be enough to provide the Internet for the entire apartment. To increase the range indication, you can perform several operations to adjust it.

How to strengthen a router
How to strengthen a router

Instructions

Step 1

To improve the coverage of your router, you can change the standard of the radio signal used. Today, several types of Wi-Fi transmission are used, among which networks in the 802.11b, 802.11g and 802.11n formats are most widespread. However, the most powerful signal is 802.11n (coverage up to 70 m2).

Step 2

Go to the control panel of your router in a browser window, following the instructions for your device. To do this, enter 192.168.0.1 (192.168.1.1, depending on the router model) in the program address bar. Enter your username and password to access the administration panel.

Step 3

In the Signal type field of the Wi-Fi section, select the 802.11n or 802.11b / g / n mode in the drop-down list and save the settings by clicking on the corresponding interface button. Reboot the router through the "Reboot" section to apply the changes. This setting will help to increase the range of the transmitted signal by several square meters, which should be enough in an ordinary apartment.

Step 4

Moving the router to a more convenient point in the room will help to increase the range of the signal. This is because there are many factors that affect Wi-Fi coverage, including concrete walls and electrical appliances (such as a microwave oven) that interfere with the radio signal. Place the router in a visible place and try to avoid obstacles such as concrete or brick walls blocking the signal in its path. Place the router somewhere in the center of the room or closer to where you would like a more powerful connection.

Step 5

To increase the signal strength, you can also purchase an omnidirectional antenna for your router and then install it on your device. This will help you significantly increase your coverage and spend as little money as possible.

Recommended: