An airfryer is an electrical device. Therefore, the main reasons for its failure should be sought in the wiring, control unit, heating element or fan.
Instructions
Step 1
If the airfryer stops working, you must first check that it is correctly connected to the mains, as well as the location of the elements of the electrical appliance. This can be caused by a loosely closed lid or an unsupported handle.
Step 2
One of the reasons for the failure of the airfryer may be a blown thermal fuse. In this case, the device does not react in any way to being connected to the network. Elimination of breakdown - replacement of the fuse. You can determine its location according to the diagram attached to the operating instructions for the airfryer.
Step 3
The airfryer may stop working due to breaks in the electrical circuit. It is necessary to check the integrity of all wires of the device, starting from the plug. If the presence of damage is confirmed, it is necessary to clean, connect and insulate the disconnected electrical wiring, assemble the device and make sure it is working.
Step 4
The airfryer will stop working even if the control unit fails. The power-on indicator will be on, but the device will not respond to commands. The cause of such a breakdown can be eliminated, as a rule, only by replacing the entire control unit with a new one. In some cases, the repair of this unit can be carried out in service centers.
Step 5
A breakdown of the heating element will also lead to the failure of the airfryer. Its serviceability can be determined most often by visual inspection. If the heating element has changed its color or size, there is only one conclusion: it needs to be replaced. Check the instruction manual for the device to purchase a similar unit in size and performance. Sometimes it is allowed to install heating elements that are different from the one used previously, but are compatible with this device. You can also find out in the instructions.
Step 6
The airfryer will not be able to perform its functions with a non-working fan. If, when the device is turned on, it does not rotate, it is necessary to disassemble the device and inspect the integrity of the fan power supply wiring, and also find out if there is any mechanical damage on it. If everything is in order with the wiring, the fan needs to be replaced.
