A wireless headset for mobile phones is a very handy thing. It will eliminate the mess with unnecessary wires. When using wireless headsets, the phone can be put in any convenient place, in a backpack, for example, which is unrealistic when ordinary headphones are used. Using a wireless headset while driving is generally irreplaceable. When driving, both hands remain free and you can drive and monitor the road normally.
It is necessary
Mobile phone, wireless headset
Instructions
Step 1
Make sure that the phone to which the wireless headset will connect is equipped with Bluetooth wireless technology. All wireless headsets for mobile phones use this interface. If your phone does not have Bluetooth, you will not be able to connect to a wireless headset. You can see if your phone has Bluetooth by looking at the technical specifications of the phone. Or in the menu of the phone itself.
Step 2
Turn on the wireless headset. On the headset, press and hold the multifunction button until the operation indicator comes on. Switch on the phone to which the headset will connect. Turn on Bluetooth. On the Bluetooth menu, tap Search for compatible devices. Depending on the speed of Bluetooth, the scanning process can take from a few seconds to a minute. After scanning, a list of compatible Bluetooth equipment will be available. Select a wireless headset from this list.
Step 3
Depending on your phone model, you may need to enter a Bluetooth data passcode. The access code can be found in the instructions for the mobile phone. Enter the code for the Bluetooth connection, and then the connection with the wireless headset will be established. You will need to enter the code only once, the first time you connect.
Step 4
If the connection is successful, the indicator on the headset will start flashing. Go to the Bluetooth menu, then to the “list of paired devices” and select “wireless headset. The headset is now connected and fully operational.
Step 5
This procedure needs to be done only once. In the future, to use a wireless headset, just go to the Bluetooth menu in the "list of paired devices" and select the headset.
