Digital television has entered every home, but not every television is capable of supporting this format. Special equipment required. The receiver converts the digital video signal received from the satellite into a conventional analog one, transmitting it to the TV screen. Connecting it to a TV is quite simple and everyone can do it. In order to connect the receiver to the TV, you can use 2 methods.
Instructions
Step 1
Through the high frequency TV RF input. For the connection through this input, a conventional shielded antenna cable is used. Connect the receiver's power supply and press the “Power” button, after which “Boot” should appear on its display. If this does not happen, then the receiver is in standby mode, and it must be turned on from the remote control. Then we turn on the TV and start the automatic channel search function. After that, the TV will start scanning the frequency range until it stops automatically at the receiver's frequency. Next, the receiver menu should be displayed on the screen. If this happens, then you have connected the receiver correctly.
Step 2
Through the low frequency output. Through the low-frequency output, you can connect the receiver to a TV using a cable that has a SCART connector or a bell connector. Connect the receiver with an appropriate cable to your TV. Connect the receiver's power cord to the mains, turn on the switch on the rear panel and wait for the “Boot” message to appear. If it is not there, turn on the receiver from the remote control by pressing the "Power" button. Then we switch the TV to the “video” mode, for this we press the “A / V” button on the remote control. If you did everything correctly, then a menu with receiver settings should appear on the screen.
