How To Open The Back Cover Of An IPhone

Table of contents:

How To Open The Back Cover Of An IPhone
How To Open The Back Cover Of An IPhone

Video: How To Open The Back Cover Of An IPhone

Video: How To Open The Back Cover Of An IPhone
Video: How open & teardown iPhone 6s for repair, Disassembly 2024, December
Anonim

Before embarking on such a responsible matter as removing the back cover from an iPhone, it is advisable to first familiarize yourself with some recommendations. After all, an iPhone is a rather expensive and high-tech device, so any manipulations with it should be approached responsibly.

How to open the back cover of an iPhone
How to open the back cover of an iPhone

It is necessary

  • - iPhone;
  • - crosshead screwdriver;
  • - tweezers.

Instructions

Step 1

First, be sure to remove the tray containing the SIM card from the device. Indeed, when manipulating the iPhone into which the card is inserted, internal parts may bend and even gaps may remain. In addition, there is a possibility of damage to the device.

Step 2

Take a Phillips screwdriver and carefully remove the two screws located near the dock connector. To do this, choose a suitable screwdriver: it should be small.

Step 3

On the iPhone screen, secure the suction cup securely and pull it towards you until the screen detaches. But keep in mind that this must be done very smoothly and carefully, otherwise the loops may burst and, accordingly, the device itself may deteriorate.

Step 4

After the screen is completely disconnected from the iPhone, you will see orange circles in which numbers are written. According to this numbering, you will disassemble the iPhone.

Step 5

Take a small tweezers with which you need to lift the cables holding the screen, as well as the touchscreen.

Step 6

Next, you need to unscrew the eight screws holding the metal plate using the same screwdriver. Make sure that all the small screws are in one safe place, because they are very easily lost.

Step 7

After that, you need to remove the cables, which are marked with a four and five. The number six marks the train-fight. It needs to be raised a little. Further, without touching the microcircuits, lift and remove the plate.

Step 8

Proceeding as carefully as possible, detach the glued battery from the cover. Use tweezers to remove the vibrator. After that, you need to remove the remaining screws and parts.

Step 9

Finally, remove the six screws that hold the display in place. The cover is now completely free and can be easily replaced. However, keep in mind that in order to avoid breakdowns and other troubles, it is best to give your iPhone to a professional to replace the cover.

Recommended: