Analog television is a thing of the past, and advanced digital television occupies its position. But the problem with a bad signal or interference during the broadcast did not solve it.
Benefits of digital TV
Digital TV is a modern alternative to standard analog TV. With this technology, the image quality becomes much better for the same cost. The essence of this technology is that television signals are a sequence of digital combinations of electrical impulses. Digital technologies provide new opportunities for transmitting and receiving data.
Digital TV has its advantages. For example, mobility. No more pulling wires and cables, all you need is a TV, antenna, digital receiver and power outlet. This is an autonomous system that you can take with you, for example, to the country house and watch TV programs with the same high-quality signal as in the city. In addition, digital TV has a large number of broadcast channels, and you can also access the Internet, TV guide, etc.
Possible causes of interference
A digital signal is usually reliable and much better than an analog signal, but even it is not immune to various kinds of interference. In any case, if the broadcast quality deteriorates, you will have to find out the reason why this happened. For example, if the TV shows poorly and there is interference, you need to check the antenna. Maybe it was poorly installed or just lost. Also, the antenna can break due to a large snowball or a piece of ice. In addition, the TV may show poorly due to a broken TV cable, a broken receiver, etc.
If, when connecting a digital TV, the masters supplied the cable to the apartment, and further wiring was carried out independently (especially if there is more than one TV in the apartment), then there may be a bad contact in the tee. Interference can also occur if there is also a computer next to the TV, and they are connected via an HDMI cable. As a rule, interference on TV starts when the computer is turned on, and as soon as the computer turns off, the image becomes high-quality again. In this case, interference may occur due to the fact that the computer is making noise (or rather a video card with an HDMI port).
If you live on the top floor and the signal is weak, it is possible that the nuts on the dividers are oxidized or burnt, the equipment is not configured, or the optical receiver is out of order. There can be many reasons for the appearance of interference, and the easiest way is to call the master to find the true cause and eliminate it.
