When purchasing a car, the buyer faces certain problems. The skills of adapting to the local conditions of the car's navigation system will be useful to many drivers.
It is necessary
- - a car with a navigator;
- - PC with Internet access;
- - Navitel program;
- - 4G WiMax modem;
- - CD with navigation maps of Europe;
- - disk for navigator firmware;
- - the Set Pnd UUID program;
- - file yfospa06.img.
Instructions
Step 1
Use the services of the worldwide network and download the yfospa06.img file of the English WinCE operating system for free. Run the software and identify it by changing the Device ID with the Set Pnd UUID program.
Step 2
Make the firmware using the yfospa06.img file. When the interface is translated into English, the WinCE Device ID module is reset to zero. Install the Navitel program version 3.5.0.689 and use the "Commonwealth" service for its correct operation.
Step 3
When adapting the standard navigator in American cars to Russian territory, install a 4G WiMax modem. Operate the navigation system with a light touch on the touch screen. Thanks to the innovative technology for transmitting data over radio waves, go online. Take advantage of useful applications, among which the most in-demand operational information about traffic jams.
Step 4
Use a working media with maps of Europe and a firmware disk downloaded from thepiratebay.org/torrent/3852053. Translate the navigation system of Japanese cars into English. Place the car on the handbrake, remove the navigation disc and turn the ignition key to the first click.
Step 5
In the Japanese menu that appears, select and activate the line beginning with "US-T …". When choosing it, be careful and keep in mind that you have only one attempt for this. Insert the firmware disc and wait a few minutes. After the changes in the program, insert a working medium. Make sure the navigation system interface is translated into English.
Step 6
When adapting the navigation system of German cars, make sure it conforms to the European type Comand APS. Start the car engine, remove the original disc and turn on the navigator. Press keys 1, 3, 8 for three seconds and activate the menu. Insert the firmware disc and select on the screen the version of the software you want to install. Do not turn off the car engine for twenty minutes while the system is being updated.
