To create modern local area networks, routers or routers are increasingly used. These devices allow you to quickly and correctly configure the network to perform the required tasks.
It is necessary
network cables
Instructions
Step 1
Let's first learn how to choose the right router. A fairly wide range of these goods is presented on the market. We are interested in a Wi-Fi router with LAN ports for connecting computers.
Step 2
Pay attention to the modes of operation with a wireless network. This refers to the protocols of radio signal transmission and data encryption. Do not forget about the signal propagation distance.
Step 3
Purchase a router that meets your specifications. Connect the equipment to AC power. Connect the Wi-Fi router with computers. To do this, you need several network cables. Use the LAN (Ethernet) connectors of the device for this connection.
Step 4
Connect the Internet cable to the Internet (WAN) port. Open a browser on any computer connected to the router. Enter the device's IP address in the address bar. It should be listed in the user manual.
Step 5
The router settings interface will open in front of you. First go to “Internet Setup”. This is necessary for the router and computers to connect to the Internet. Change your network connection settings to those recommended by your ISP.
Step 6
Go to the Wireless Setup menu. This menu needs to be configured according to the specifications of your laptops that you will be connecting to the router. Enter an arbitrary name (SSID) and password (Password), select the types of radio signal and data encryption.
Step 7
Save all changed settings. Power off the router for a few seconds. Turn on the equipment and connect the laptops to the wireless hotspot you created. If you did everything correctly, Internet access will be carried out synchronously from all computers and laptops.
