In order for the image transmission to the TV to be as clear as possible, a signal of sufficient strength is needed. Often it is not enough, because of this, interference occurs. There are several ways to amplify the signal, depending on the type of television connection.
Instructions
Step 1
Determine the reason for the weak signal. If you are a cable TV subscriber (problems with signal strength are not common here), then, first of all, check the integrity of the cable. Perhaps he was twisted somewhere, passed over. Because of this, the signal could be disrupted.
Step 2
You can solve this problem yourself, or contact the company whose subscriber you are for help. It is necessary to cut out the damaged part of the cable and solder the adapters in order to reconnect it. After performing all these manipulations, there will be no need to amplify the signal.
Step 3
Do the same if you are using a satellite dish or a regular TV antenna as a receiver. The signal may be weak due to the fact that you have installed the device, ignoring the simple rules set out in the instructions. This means that the antenna must be installed on the side of the house where there are no significant obstacles in the way of receiving a signal. This can be a large tree, a high-rise building, or some other large object. If the antenna is installed correctly, check the connections. Perhaps this is the reason. By troubleshooting your connection problems, you can amplify the signal.
Step 4
Buy a more powerful receiver. This device can enhance the TV signal. Connect it following the rules set out in the installation and operating instructions for the device, or contact the appropriate specialist. The receiver is an integral part of the satellite dish network. The number of channels and the clarity of their reception depends on it. Even if you have a superpowerful antenna, but at the same time a poor-quality receiver, this can significantly affect the quality of the received signal. In the case when it comes to an ordinary television antenna, try to choose the optimal direction for picking up the signal. This will solve the problem of the quality of its transmission.
