Having connected speakers to your computer, it is important to set them up correctly. Otherwise, if the devices are incorrectly connected to your personal computer, there is a high probability that the speakers will not work at full capacity.
It is necessary
Computer, speakers
Instructions
Step 1
Connecting speakers. There are no nuances or peculiarities in the connection of the speakers. The device is connected to the computer using the corresponding plugs that are inserted into the jacks of the sound card. The main difficulty can be traced at the next stage.
Step 2
Setting up speakers. When connecting the speakers, you probably more than once paid attention to the dialog box that appears on the desktop immediately after plugging the plug into the jack. This window should not be ignored. It is the settings you can make here that will directly affect the overall volume of the connected speakers.
Step 3
If you connect ordinary speakers to a computer, the highest volume is achieved by defining them as line-out. That is, you need to check the corresponding box in the window that appears. If you connect other types of audio devices, you need to build on their characteristics. For example, when connecting a subwoofer to your computer, set it to Subwoofer / Center Out.
Step 4
Also, when connecting speakers, it is important to use all mixers for subsequent sound reproduction. To do this, double-click on the dynamics in the system tray and click the "Options" button in the window that appears, then switch to the "Properties" tab. Here you need to activate all devices by putting a checkmark in front of each item. After saving the settings, you will see that the number of sliders in the window has increased. You need to put them in the maximum position. In this way, you will achieve maximum amplification of the sound of your speakers.
