If you need to block incoming calls from any number (or even several), then use the convenient service of the Megafon operator, which is called the "Black List". It should be noted that subscribers of other companies will not be able to connect it.
Instructions
Step 1
So, the first thing you need to do is activate the service. This is not at all difficult to do, since you just need to dial the free number 5130 on the mobile keyboard and press the call button. In addition, Megafon subscribers can send a USSD request to * 130 # at any time. The operator, after receiving your application, will process it, and then (literally in a minute or two) will first send one SMS to your phone, and then the second. From the first one you will learn that the "Black List" service has been ordered. But the second message will contain information about whether it was connected. If the activation procedure is successful, then you can edit your list, that is, enter the required number (or numbers) into it, as well as delete, view the status of the list.
Step 2
Now you need to add the number itself to the list. This can be easily done using various methods. You can, for example, dial the USSD command number * 130 * + 79XXXXXXXXX # and press the call key, you can also add any number to the black list by sending an SMS message. In the SMS text, indicate the subscriber's number, and put a + sign in front of it. It should be noted that the mobile phone number must be recorded only in ten-digit format (and via +7). If you enter it incorrectly, the operator will not receive your request.
Step 3
As soon as you edit the list, you can view it (check if all numbers were entered correctly and without errors). To view it, use the short number 5130: send an SMS message to it, and specify the INF command in its text. In addition to this number, there is also a USSD request * 130 * 3 #.
Step 4
Please note that to delete a number, the operator provides subscribers with the USSD command number * 130 * 079XXXXXXXXX #. If you do not want to delete each number separately, use the short request * 130 * 6 #.
