How To Calibrate The Battery

Table of contents:

How To Calibrate The Battery
How To Calibrate The Battery

Video: How To Calibrate The Battery

Video: How To Calibrate The Battery
Video: Calibrate the Battery on HP Notebooks | HP Computers | @HPSupport 2024, April
Anonim

Battery calibration is used to edit the parameters for displaying the battery charge level of the device, increase the operating time of the device and eliminate unnecessary financial costs. The calibration process does not require special technical knowledge and the involvement of additional software.

How to calibrate the battery
How to calibrate the battery

Instructions

Step 1

Fully charge the device battery using a USB cable connecting the device to a computer, or a special charger (for PDAs and other mobile devices).

Step 2

Wait until the battery level reaches 100% and turn off the selected device (for PDAs and other mobile devices).

Step 3

Wait for the maximum possible discharge of the device's batteries (be careful - if the battery is completely discharged, you may go into the Hard Reset mode!) And repeat the above procedure (for PDAs and other mobile devices).

Step 4

Complete the process of fully charging and then discharging the battery at least 6 times (for PDAs and other mobile devices).

Step 5

Perform a Hard Reset of the device after the last full charge of the batteries (for PDA and other mobile devices).

Step 6

Download and install the dedicated Pocket Battery Analyzer application on the selected device to enable the auto power off function to be canceled (for PDAs and other mobile devices).

Step 7

Apply the checkboxes in the "Ignore auto power off" and "Auto power off at" fields (you must specify the desired value) and check if the device turns off at the specified moment (for PDAs and other mobile devices).

Step 8

Use the same procedure to carry out 6-7 full charge-discharge cycles of the laptop battery.

Step 9

Click the "Start" button to bring up the main menu of the system and go to the "Control Panel" item (for laptops).

Step 10

Expand the Power Options link and uncheck the Allow Sleep Mode (For Laptops) box.

Step 11

Uncheck the boxes next to Screen off, Hard drive off, and Screen saver off (for laptops).

Step 12

Use the battery calibration procedure at least once every 6 months.

Step 13

Use a full charge and discharge cycle of the battery at least once a month.

Recommended: