Many amateur photographers do not have the opportunity to acquire a professional video camera and therefore take pictures using a mobile phone. And although most often such pictures are depressing in their quality, there is a way how to create a full-fledged video camera from a phone.
Necessary
- - thermo-casing "K 15-5-70-12";
- - uncased modular camera.
Instructions
Step 1
Remove the visor from the casing and unscrew the casing. Secure the camera to the lens barrel in the barrel housing using the two retaining screws. Adjust the longitudinal position of the camera so that the lens is closest to the glass. Make sure that the clip does not appear as a heater.
Step 2
Connect the camera using the terminal connections according to the marking. Pass the external wires through the sealed glands and connect them. Continue to follow the labeling.
Step 3
Place a silica gel bag in the shroud, and then remove the plastic wrap from it. This is necessary in order to exclude the possibility of glass fogging. Tighten the housing without using excessive force. Check the tightness of the O-ring between the back cover and the body. The fit should be snug.
Step 4
Slide the visor over the body. Connect the camcorder to the power supply and to the monitor. Check the clarity and quality of the image. If everything is in order, the camcorder is ready for outdoor installation.
Step 5
The sequence of steps for assembling the camcorder is optional and may vary depending on your goals. It can be easily and discreetly installed in the office, sales area, in the car, at the entrance to the premises. The clarity of the picture is much higher than the picture taken by a mobile phone.
