If the pictures taken with your camera become less clear, there are some black blotches or hairs, then there is a need to clean it. You can do this yourself or contact the service center.
Instructions
Step 1
First of all, determine which matrix is installed on your camera - digital or SLR, since they are disassembled in different ways. If the mirror is, then after removing the lens, you can get to the matrix, since it is most often cleaned. And if digital, the situation is more complicated, and the lens is removed almost as a last resort.
Step 2
To clean the matrix, use any of the suggested methods. The simplest method is to blow through the matrix with a powerful pressure using a can of compressed air. Or purchase a set of tools for cleaning the camera sensor. Use only special cleaning fluids, special wipes or nonwoven cloths, pencils or sticks.
Step 3
If financial opportunities permit, buy a professional set for cleaning photographic equipment, which includes various "pears", brushes, rags, liquids and follow the recommendations of the instructions. And one more way, as mentioned above, is to take your camera to a service center.
Step 4
Remember, during cleaning in any case, do not blow either on the lens, or on the matrix, or on the microcircuits. Because by blowing off dust, you run the risk of contaminating parts with droplets of saliva, which can lead to damage to the camera.
Step 5
Eliminate wiping matrices, lenses and microcircuits with home T-shirts, scraps of cloth, etc. This will scratch everything you can. Do not use liquids such as "Myth", "Fairy", "Pemolux" not intended for cleaning photographic equipment.
Step 6
When cleaning the sensor of a digital SLR camera, be extremely careful not to scratch it. Do not use cotton swabs, tweezers, brushes, etc. for cleaning. In the event that dirt gets under the protective glass of the matrix, do not try to get it, it is better to contact the master.
