The automatic line identifier on a landline phone allows you not only to find out who is calling you at the moment, but also to view all the phone numbers from which they called you in your absence. This is a fairly convenient feature for both home and office phones.
It is necessary
Panasonic phone
Instructions
Step 1
Enter the phone menu to enable Caller ID, select Base Station Settings, then select Caller ID. While in this menu, dial 255 from the keyboard. The “Auto-raising” item will appear on the screen - press “On”.
Step 2
Activate the auto-raise function to enable the detector. To do this, go to the menu and select "Base settings". Press key 3. Then enter the pin code (the default is 0000). Then press numbers 5 and 2 sequentially. When there is an incoming call, press the call button once to determine the number, and the second time to start the conversation.
Step 3
Set up automatic caller ID on your Panasonic 325 model. Enter the "Base setup" mode of the phone. Then select "Caller ID", click "Ok". Next, use the joystick to scroll down until a line appears on the screen. Dial the digits 255 in sequence. Press "Ok". Then, in the menu that appears, select the "Auto-Receive" option. Then click on the "Ok" button.
Step 4
Select the "On" position, click "Ok". Then select the "Caller ID" mode, set the number of digits - 7. Next, select the number of signal requests - 5 (maximum). Set the duration of the request signal - 100 ms (minimum value). For Call Answer Delay, select 100ms.
Step 5
Set the “Number of calls” field to 1. In fact, the number is determined after three or two rings, that is, after the automatic caller ID is triggered. When you call a phone with Caller ID, such a switch is heard in the receiver. This completes the Caller ID setup. You can also subscribe to the CallerID service with your telephone operator to complement the Caller ID.
Step 6
Go to the phone menu, select "Base setup", enter 0000, then select "Other", then "Change PIN code", dial a combination of numbers 726276647, then enter the EEPROM8 code and 007R5 F-06.
