The creation and implementation of new technologies has made it much easier to connect and set up home theaters. The use of stabilizing circuits and control of microprocessor technologies, allows you to connect a home theater with ease of installation and configuration in the required place.
Instructions
Step 1
The home theater connection depends on several parameters. First of all, from the choice of equipment, the quality of the connection and the correct location of the speaker system. The recommended standard systems may not be suitable for the layout of the apartment, therefore, they require additional settings. Having chosen the necessary speaker system, receiver and high-quality cables, you can start connecting.
Step 2
First, you need to choose a place to install the TV so that the speaker system is evenly distributed around the circle.
Step 3
Then you need to install the front and rear speakers, while taking into account that the distance from the viewing point to the front or rear speakers should be the same and distributed in a circle or arc. This will reduce the additional audio settings.
Modification and cord length must be the same for one type of speaker. That is, the front or rear speaker cords must be the same length.
The quality of the cords, the length, the correct connection, greatly affects the quality of the audio signal.
Step 4
Connecting a conventional TV, DVD-player or VCR to the receiver is made through the analog inputs.
Step 5
Connecting a satellite, computer or Blu-ray player via HDMI or component outputs for high definition signals.
Step 6
Some models of DVD players, TVs and digital camcorders can be connected via DVI inputs.
Step 7
High quality DVD encoded audio can be connected via digital input, allowing high quality audio to be transmitted.
Step 8
Connecting a home theater system using different inputs and outputs on the receiver will allow you to use a different amount of equipment and create the maximum quality of the output signals.
