Watching paid satellite channels can be done in a legal and not entirely legal way, the latter is not prosecuted in Russia. In the first case, it is enough to have a satellite receiver recommended by a TV provider, in the second a DVB card for a computer or a stitched tuner and a terrestrial connection to the Internet. This is necessary in order to receive decoding keys from the cardsharing server.
It is necessary
- - DVB card;
- - plugin csc 4.0.0.2;
- - access card.
Instructions
Step 1
Install DVB-card of SkyStar 2 type into the slot of the computer motherboard. Before that, install the software for it on the PC. Install the ProgDVB program on your computer. Configure DiSEqC parameters, if available, or specify a satellite. Download the csc 4.0.0.2 plugin from the Internet and unpack the archive to the ProgDVB root folder, then move the msvcr70.dll file to the WINDOWSSYSTEM32 directory, do not copy, otherwise, if it hangs in the same place, the program will not start. Check the installation by launching ProgDVB, go to the Plugins menu. The CardServer Client section should appear in it.
Step 2
Configure the plugin. To do this, run the ProgDVB program. Connect to the cardsharing server and get the connection parameters. Go to the Plugins menu, then CardServer Client and Configure Server. Enter the following values in the window that opens: Protocol - newcamd525; User name - login for access to sharing; Password - password for access to sharing; Card Server IP Address - 81. XXX. XXX. XXX, where "X" is the server address balls; Port - connection port (will be specified when connecting); Optional Parameters - 0102030405060708091011121314, no spaces.
Step 3
Click successively on the "Add Item" and "Save Configuration" buttons, the window should close. The configuration is over. Connect to the Internet using a landline - ADSL, GPRS, Wi-Fi, etc. For example, if you purchased the package of the NTV + channel, then after pointing and setting up your PC to the Eutelsat W4 / W7 36E satellite, scan its transponders. Save them and they will appear on the left side of the ProgDVB window. Turn on the desired channel, move the cursor over it in the TV window of the program on the right. Right-click and select Channel Property. In the table that appears, double-click on the required CA type (ID), issued upon connection. Click Apply and OK. The picture will appear in a few seconds.
Step 4
Tune in pay-per-view channels on your receiver. To do this, purchase a satellite tuner with a CI slot for access cards. Connect to your TV provider and buy this card from him. Insert it into the slot and tune the receiver to the desired satellite.
