How To Install Channels On The Tuner

Table of contents:

How To Install Channels On The Tuner
How To Install Channels On The Tuner

Video: How To Install Channels On The Tuner

Video: How To Install Channels On The Tuner
Video: TV TUNING || How To Install Channels 2021 || How To Use & Retune Free view DTV || DTV Tune 2024, December
Anonim

A tuner is a special device that can decode the incoming signal and transmit it to the TV in a form that it understands. Basically, satellite receivers are now widespread, which are part of a set of equipment for satellite TV.

How to install channels on the tuner
How to install channels on the tuner

It is necessary

  • - television;
  • - satellite receiver.

Instructions

Step 1

Connect the tuner to your TV using an available jack. Select a channel convenient for you, on which the satellite receiver will show. Set in manual mode the command - "Channel search". The tuner at this moment should be turned on, and numbers (not hours) should be displayed on its screen. Save the channel, it is on it that satellite channels will be shown, you can switch them on the receiver itself.

Step 2

Add a channel to the tuner by scanning the required transmitter on the selected tuner satellite. To do this, you need to first determine which channel you want to tune. Use the online channel search table https://www.tv-sputnik.com/ch_select.php. Use it to determine which satellite the channel is on, and see its settings in the transponder list.

Step 3

Go to the tuner menu in the section that is related to the settings, namely the transponder settings. The chapter name may vary depending on the tuner model. Select the desired transmitter. Then press the button on the remote control to scan the transponder and add channels on the receiver. Carry out an automatic scan of the channels of those satellites that are tuned twice a month.

Step 4

Select a satellite from the receiver menu, then press the scan button. Select the desired mode: manual, auto, blind, or network. Set the position to "Auto" so as not to overwrite the transponder settings. The tuner will automatically find all working transponders received by your satellite dish.

Step 5

After you find the desired channel, go to the receiver's menu, select the "Channel editor" - "TV channels" item and add the channel to the list. At the time of selecting channels, set the folder where they will be displayed, click the "OK" button and press the white button on the remote control.

Recommended: