A webcam is a device that connects to a computer or laptop and is designed to make video calls. If you want to save money, you can also use a regular video camera as it.
Instructions
Step 1
Make sure your camcorder has USB connectivity to your computer. Wait until the system detects the new device. After that, the automatic installation of the drivers necessary for the operation of the camera will begin, or the system will prompt you to do this manually. You can install the necessary services from the CD that comes with the camera, or download from the Internet.
Step 2
Check the contents of the disc that came with the camera and the instructions for it. In some cases, it is necessary to manually install a special driver or program in order for the camcorder to be used as a webcam. After installing all the components, restart the computer without disconnecting the device.
Step 3
Configure the camera using the utility from the kit or the section from the control panel of the operating system called "Printers, scanners, cameras" by opening the settings of the corresponding device. Set the appropriate image quality depending on the specifications of the camera and the bandwidth of your internet connection.
Step 4
If your camcorder model does not support the connection mode described above, use special software such as the shareware WebcamDV application. With it, the operating system will recognize the connected device for shooting as a full-fledged webcam, even if it is not.
Step 5
Make sure the camera can be positioned comfortably in front of your face. To do this, you should purchase special holders attached to the monitor or installed on the desktop. Remember to adjust the system volume so that you can be heard clearly during the broadcast. To do this, you can adjust the sensitivity of the microphone built into the camera.
