The phone case can be easily removed. After prolonged use of the phone and if there are external signs of damage. You can replace this item by purchasing a new one for replacement.
Necessary
- - crosshead screwdriver;
- - a plastic card.
Instructions
Step 1
Prepare your work surface so as not to lose the small parts of your mobile device. Also, do not allow the phone to fall when disassembling its case, loosely screwed parts of the phone break very easily, and after that they usually cannot be repaired or replaced. Choose a screwdriver according to the size of your phone screws.
Step 2
Disconnect the phone, remove the cover from the battery compartment, if necessary, after pressing the special buttons on the sides holding it. Remove the battery, memory card, and operator card. If the removable storage is on the side, press down gently on it.
Step 3
Find all available mounts on your phone, most often located behind the battery cover. They can also be hidden under the battery or special service stickers on your phone. Unscrew them and carefully inspect the joint of the body parts of your mobile device.
Step 4
Make sure that its component parts are not held together with special glue (this happens in some models). If so, then in this case it is best not to risk it and take the phone to a service center.
Step 5
If, after all, the phone case can be removed at home, use a mild, rounded-off table knife or a thin plastic card, which you will not need in the future. After opening the phone casing, open it completely, prying the other sides, however, do not make any special efforts so as not to damage the appearance of the casing.
Step 6
Remove the case from your mobile device by slightly prying the screen and camera module. Remove the keyboard buttons from it, clean the microcircuit. If necessary, replace the body following the steps in reverse order.
