If you need to change the socket for a mobile phone, you can always do the necessary actions with your own hands. This will allow you to save an extra pretty penny on contacting a specialized service.
Necessary
Cellular telephone
Instructions
Step 1
The first step to disassembling a mobile phone case is to remove the battery from it. Usually, the battery is located under the back cover of the device. To remove the battery, simply remove the cover and remove the battery from the case. Also today, quite often the back cover plays the role of a battery - the battery is designed as a part of the phone body. If you have just such a mobile phone, you just need to remove the cover. Regardless of the type of battery, removing it will give you access to the screws that secure the phone case.
Step 2
To continue disassembling the case, first you must free it from all the screws that hold the socket on the device. So that in the future you do not get confused in the purpose of the screws during assembly, it is recommended to do the following. On a piece of paper, sketch out the location of all fixing screws on the case. Then, unscrewing each screw, place it on the corresponding mark on the diagram. This way you can avoid confusion when re-assembling the case. Once you unscrew all the screws, you can proceed to further actions. It should be noted that, given the small size of each screw, the tip of a kitchen knife will be the best tool for unscrewing it.
Step 3
After the case is released from the fixing screws, disassemble the phone cover. To do this, you need to pull the front and back of the device body in different directions. At the moment, both parts will be fixed with plastic couplings, which can be easily separated.
Step 4
To assemble the panel, it will be enough for you to connect its two parts and press them tightly together. When assembling the phone case, pay attention to the moment that the previously unscrewed screws take their original position.
