Some modern models of laptops, netbooks and computers are equipped with an additional function that allows you to use the device monitor as a touch control panel.
Necessary
your touch device
Instructions
Step 1
Examine your keyboard carefully for any dedicated monitor screen control buttons. Pay special attention to the multimedia keyboard - sometimes the key with the desired command is located there. Press it and deactivate the touchscreen, returning it to its normal state, if necessary. Also look at the touchpad with buttons, if your laptop model has one.
Step 2
Check the instructions for your device in order to find out the special combinations. They usually use the system keys: Ctrl, Fn, Alt, Shift, and so on. If you have an Fn key, look at the top numeric keypad for a button with an icon to disable the touch screen, F1, F2, F5, and so on are also commonly used.
Step 3
Go to the BIOS of your computer. To do this, when loading it, press a special button that is responsible for entering this menu. It can be Delete, F8, F1, F2, Fn + F1 and so on, combinations may vary depending on the model. Also pay attention to the boot screen when you turn it on, there should be a line “Press … to enter setup”, instead of dots, the required combination will be written.
Step 4
Find your monitor control in BIOS and disable touch control using the specially assigned keys written in the menu below. They may vary depending on the device model. Exit the BIOS program after saving the changes.
Step 5
Start your computer and see if the touch screen turns off. If it doesn't help, read the instructions carefully. Comes in a complete set, or view the information you are interested in on the official website of the computer manufacturer by searching for your model, you can also find out from the seller of your computer when purchasing.
