Canon camera batteries are charged in different ways. Basically, new devices use special devices for this, and some are also charged from a computer or a standard charger.
Instructions
Step 1
If your camera comes with a special device for charging the battery, remove it from the compartment and insert it into a special container, while taking into account the connection of its contacts with the contacts of the SDU. Connect a special network cable to the container, which is included with the camera (and can also be replaced with a similar longer length, there are such cables in almost every home).
Step 2
Connect the device plug to a power source and wait until the battery is fully charged. This can take several hours (2 to 4). If this is your first time charging it, it is best to completely discharge it before doing so, and then leave it in the RAM for a little longer than the allotted time to increase the capacity.
Step 3
If your Canon camera uses standard rechargeable batteries during operation, purchase an AC charger for them at any nearest radio store in your city. You can also order them at home through the Svyaznoy online store or purchase them in cell phone stores and household appliances stores.
Step 4
Insert the batteries into the device, making sure to observe the polarity. Wait until the green indicator appears, normally it takes about 18-20 hours to fully charge two large capacity batteries.
Step 5
If your model of camera supports charging from the USB port of a computer, connect it using the mini-USB cable that usually comes with the device. Pay attention to the indicator on the camera screen, it will show the battery level.
Step 6
It is best to use original cords for the connection. The process of charging the battery in this case may take about 3 hours. Also, in such cases, sometimes a special adapter from USB to a regular plug for an outlet is included in the kit, so that the charging process takes place without the participation of a computer.
