Using the MMS service, you can send very long text messages “in bulk”, paying about the same amount for several thousand characters as it would cost only three or four “glued” SMS. In addition, you can attach photos, voice messages and even small video greetings to such a message.
Instructions
Step 1
Make sure your Nokia phone is equipped with MMS messaging.
Step 2
In the menu of the device, select the item "Tools" - "Settings" - "Connections" - "Access points".
Step 3
Press the "Functions" button.
Step 4
In the menu that appears, select "New access point" - "Using standard parameters".
Step 5
In the "Connection name" field, enter its name. It can be arbitrary, but in order not to get confused, indicate in it that the access point is intended for MMS.
Step 6
In the "Data feed" input field, select the "Packet data" option.
Step 7
Go to your carrier's website from a computer or other phone. Find the information for setting up MMS on this resource.
Step 8
Based on these data, enter in the "Access Point Name" field the line indicated on the operator's website as APN (Access Point Name).
Step 9
In the "Username" field, enter the name specified on the operator's website.
Step 10
In the "Prompt for a password" box, select the "None" option.
Step 11
In the "Password" field, enter the password specified on the operator's website.
Step 12
In the "Authentication" field, select "Basic".
Step 13
In the "Home page" field, enter the URL specified on the operator's website.
Step 14
Press the "Functions" key and in the menu that appears, select the "Additional parameters" item.
Step 15
In the Network Type field, select the IPv4 option.
Step 16
In the field "Phone IP-address" enter the address indicated on the operator's website, or, if it is not there, select the "Automatic" option. Do the same with the "DNS Address", "Proxy Server Address" and "Proxy Port Number" fields.
Step 17
Launch the Messages application on your phone. Press the "Functions" key and select the "Settings" item in the menu that appears. In the new menu, select "MMS Messages". In the Current Access Point field, select the name of the point you created.
Step 18
Save the settings, activate the MMS service with the operator, if it was not done earlier (or it is not connected by default), and then restart the device. Send MMS of any content to a special number indicated on the operator's website (for example, for Beeline it is 000). After receiving confirmation, start using the service.
Step 19
If possible, activate the unlimited MMS service.
