Anyone who has a touchscreen phone or tablet will agree that these devices cannot do without a protective film. Without it, the screen will immediately get dirty, and scratches will not be difficult to place. Therefore, every owner of touchscreen devices should be able to apply the protective film themselves. And now I will tell you how this is done.
Necessary
- - scraper;
- - microfiber or lint-free cloth.
Instructions
Step 1
Well, first we need to prepare for this painstaking business. To do this, you need to find the most dusty place in the house. Many people do this procedure in the bathroom. Before pasting, you should also wash your hands thoroughly so as not to stain the film.
Step 2
Now we take our film and carefully wipe it with microfiber, which comes with it in the kit. If suddenly you do not have it, then do not be discouraged. You can do this with a napkin. It is worth wiping not with indiscriminate back and forth movements, but with one movement from bottom to top of the film. We check its purity with the help of bright light. If there are stains and lint on it, then wipe it until it becomes perfectly clean.
Step 3
Next, carefully peel off the lower protective layer of the film. We apply it to the screen exactly so that it coincides with it vertically and horizontally. As you apply the film, loosen the rest of the adhesive side and smooth it with your fingers at the same time.
Step 4
If, nevertheless, during the gluing of the film you have formed bubbles, then we get rid of them with the help of a scraper. You can also use a cardboard box or credit card instead. All that remains is to wipe the screen with a napkin.
Do not be upset if you did not succeed in sticking the film the first time. Remember that you can peel it off, rinse it, dry it and stick it again.
