If you decide to get good speakers, then you can, of course, just go and buy them in the store, or you can show your technical imagination and make good speakers yourself.
Instructions
Step 1
Good speakers are, first of all, high-quality speakers. The experience of many sound lovers says that the best option for do-it-yourself assembly would be a full range speaker such as the Visaton B200. This is one of the few audio devices that can cover the entire audio range from 57 to 16000 Hz, and this will allow you not to think about speaker matching. The cost of such speakers is quite high - from 10,000 rubles, but good speakers are never cheap.
Step 2
Find the right amplifier. You can take the LM3886 chip. Connoisseurs argue that this is a win-win way to get high enough quality for little money. They often talk about possible distortions in sound, but usually they are so small that not every person is able to hear them.
Step 3
If you are going to install an amplifier, think about the cooling system in advance. To do this, you can take an ordinary cooler from a computer processor.
Step 4
Prepare the enclosure of future speakers. To do this, you can use a chipboard sheet with a thickness of at least 16 mm. It is better to use solid wood sheets, but they are more expensive. Saw the sheets into pieces of the desired size, make sure that the corners are even. Glue the body parts using liquid nails glue, and then tighten with self-tapping screws.
Step 5
Consider whether you will cover the speakers with a grill or cloth to protect them from damage and dust. The fabric will drown out the sound a little, and the grille does not look very nice. Try to choose the one that works best for you.
Step 6
Paint the speakers a suitable color or cover them with self-adhesive tape. It can also be different: "wood grain", silver, black. It all depends on your desire.
Step 7
Install the power and audio connectors. It is better to make the power connectors the same as those of a computer - then it will be much easier to find a suitable cord. Plus, it's easy to turn off so it doesn't get in the way when carrying it around.
