The iPhone, despite its rather attractive appearance, has a rather sturdy construction. If you are not familiar with its internal structure, it is best not to disassemble it, leaving it to the service center to repair it.
Necessary
screwdriver
Instructions
Step 1
Prepare your work surface in such a way that you do not lose small detachable elements. Disassemble the phone, writing down the sequence of actions along the way. Remove the screws holding the iPhone panel from the bottom.
Step 2
Carefully remove the glass and the digitizer from it, unscrew the fasteners from the latter. Please note that the screwdriver must be very thin, as you can simply damage the screws and they will simply be unusable in the future.
Step 3
Remove the device motherboard. Find the battery, carefully remove it from the device. Disassembly is complete. It is best to write down which screws fit which connector, as in the future you can simply get tangled and break the threads on the device case. The best option would be to record with a video camera the sequence of removing the screws, since further assembly takes place using the reverse sequence.
Step 4
Assemble the device. Connect the battery, secure the position of the motherboard. Please note that it should be as straight as possible. Secure the digitizer position, making sure to use the same fasteners that were there before.
Step 5
Make sure all parts are firmly attached, as if you drop the phone, the internal parts may be damaged if struck against a hard surface. Close the phone cover and tighten the external screws. Please note that it is best not to disassemble the phone at home, if you are not familiar with its device, you can damage it without fixing the previous malfunction. Use a dedicated service center and contact Apple Sales and Customer Service in your area for support.
