Cell phone flashing is necessary in order for it to have more opportunities to work. There are several types of firmware for Samsung i900 phone. Only you need to install them very carefully.
Necessary
- telephone;
- installation program;
- computer
Instructions
Step 1
Since the communicator Samsung i900 is a hit in the cellular world, many developers have released an impressive number of firmwares for it. You can find among them both minimalistic and very functional. When installing (flashing) them on the phone, one of the basic rules must be observed - they must be installed very carefully, otherwise the phone can be broken. Another rule to follow is not to touch the screen while flashing your phone. This is due to the fact that the monitor is touch-sensitive and you can, by accidentally touching your finger, knock down the entire setting. Before flashing your communicator, download a special program from the Internet. Experts recommend: while it is swinging, just in case, transfer the data and contacts available in the phone to your computer. That is, make a backup in case of unsuccessful firmware. When the program (called SamsungModem) is downloaded, install it on your computer first. Now you have it in an archived state. Therefore, you need to open the program. After that, run the GrandPrix flasher program, which was stored in the archive package.
Step 2
In the GrandPrix select the Select a platform item, go to it and click on the GrandPrix lv image field. Now press the PDA button, a plate with a list of files will appear. You need to select a.bin file. Double-check that you are working with the PDA button and not with any other.
Step 3
Then, at the request of the system, uncheck all the boxes, confirm your intention to start the firmware by pressing the detect button, and turn off the phone. The SIM card and memory card must be removed from the device before starting the firmware, and the battery must be replaced after this procedure. To start the installation, the USB cable must be connected to a phone that is not yet working and only then click the "enable" button.
Step 4
Then, in the GrandPrix program, select the Start download button and wait until the firmware is fully downloaded to the phone (this can be monitored by the filling of the green bar on the phone) When download complete appears, it means that the installation is over. This process takes about 5-8 minutes. The most important thing is not to touch anything at this moment. After the system informs you that the download is complete, disconnect the cable and press the reset button on the phone.
Step 5
The phone should reboot, after which you need to manually restart it again. When the home screen appears, the firmware is almost complete. It remains only to wait for the final installation of the software, after which the phone will automatically reboot again. To get the software on your phone correctly, reset the settings and turn the phone off and on again. That's it, the firmware was done correctly, and now you can enjoy the unlimited possibilities of your communicator.
