The washing machine faithfully serves in the household, but only until one of its components fails as a result of a breakdown. Some faults in the washing machine can be eliminated by yourself without resorting to the services of a service center. Sometimes, for example, it is required to dismantle the drum of a machine in order to repair or replace it.
Instructions
Step 1
To disassemble the washing machine, you will need the following tools: Phillips screwdriver, flathead screwdriver, flat wrench set, pliers, wire cutters, pliers. Only in this case, disassembly and repair of the washing machine can be done quickly and without problems.
Step 2
Remove the top cover of the washing machine. Detach the control panel, front and plinth panels of the chassis.
Step 3
Carefully disconnect all connections to the tank from the tank.
Step 4
Unscrew the mounting bolts with a wrench and remove the front counterweight.
Step 5
Remove the screws connecting the front and back of the tank.
Step 6
The body is usually attached to the base of the machine with two screws. Remove these screws and slide the case back.
Step 7
Remove the drive belt. Unscrew the retaining nut and disconnect the pulley. The drum can now be removed.
Step 8
Repair the drum malfunction or replace it with a new one, depending on the purpose of the repair. The drum is installed in place in reverse order. Pay particular attention to the connection of the nozzles to the tank.
